New Items

Product Details:

Measure UV-AB Light from Natural and Artificial Light Sources

The Extech UV505 pocket-sized UV light meter measures UV-AB light from natural and artificial light sources used in outdoor activities and indoor medical testing, laboratory/research, industrial, education, electronics, and forensics/criminology applications. It offers a backlit display, cosine corrected sensor, two selectable ranges, zero function, display hold, and auto power off. Includes a pouch to protect and store your meter.

Additional Information:

• Delivery Time: 6-8 Weeks
• Packaging Details: Complete with two AAA batteries and a pouch

Product Details:

The VB450 is a convenient compact sized Vibration Meter which measures vibration levels in industrial machinery. Misalignment, poor balancing, structural compromises, and other factors can cause unwanted vibration increases. VB450 features a wide 10Hz to 1500Hz frequency range and provides Displacement, Velocity, and Acceleration measurement. Complete with remote sensor, magnetic mount, 9V battery, wrist strap, and soft case.

Additional Information:

• Item Code: VB450
• Delivery Time: 6 to 8 weeks
• Packaging Details: Complete with remote sensor, magnetic mount, 9V battery, wrist strap, and soft case

Product Details:

The SDL800 measures and datalogs vibration using a remote vibration sensor with magnetic adapter on 47.2"(1.2m) cable. It offers a wide frequency range of 10Hz to 1kHz with basic accuracy of ±(5% + 2 digits). Manually store 99 readings or continuously datalog using a SD memory card, which allows user to easily transfer collected data to a PC for further analysis as an Excel format. Complete with remote sensor, magnetic mount, 6 x AA batteries, SD card, and hard carrying case.

Additional Information:

• Item Code: SDL800
• Delivery Time: 6-8 Weeks
• Packaging Details: Complete with remote sensor, magnetic mount, 6 x AA batteries, SD card, and hard carrying case.

Product Details:

The Extech RH600 accurately measures and datalogs dew point levels in compressed air systems. This high-precision meter can help manufacturing professionals protect product quality while avoiding damaged pneumatic equipment, corrosion, and problems in cylinder and valve systems. Featuring a color graphical display, the RH600 provides clear, stable readings, allowing you to measure dew point temperature down to -50°C (-58°F) in max ambient pressure of 20 bar. Set high/low audible and visible alarms for temperature, relative humidity, and dew point thresholds. You can also easily log and transfer recorded data to a PC in CSV format to create inspection reports fast.

Additional Information:

• Item Code: RH600
• Delivery Time: 6-8 Weeks
• Packaging Details: Complete with RH601 Dew Point Probe, AC adapter, Micro USB to USB-A cable, 3.7 V Li-ion battery, and hard case

Product Details:

Vibration trending and analysis can help detect serious problems with industrial machines long before the damage can be seen. That’s why the FLIR SV87-KIT Vibration Monitoring Solution is essential for manufacturing processes that use rotating machinery, industrial pumps, fans, gearboxes, and motors. The included remote monitoring gateway stores sensor data and wirelessly transmits readings in real time to a mobile device or PC. This allows professionals to make knowledgeable decisions about machine operation and maintenance without having to wait for the next manual inspection – reducing unplanned downtime, lowering operational costs, and improving profitability.

Additional Information:

• Item Code: SV87
• Delivery Time: 2 weeks
• Packaging Details: GW65 Gateway for Vibration Monitoring Solution, 4 Gateway AC connectors for US/EU/UK/AUS power outlets, 4 SV87 Remote Vibration/Temperature sensors with adhesive tape, Quick Start Guide, access to configuration and visualization software

Product Details:

Simultaneously datalog and monitor relative humidity, temperature, and calculated dew point on the Extech RH550. It features live or user-scheduled recording time and programmable Min/Max alarm set points. A built-in stand is included for desktop use, as well as a bracket for wall-mounting. The RH550 also features a field-replaceable probe that can be attached to the monitor or on a 6.5 ft (2 m) cable. This recorder is useful in office buildings, conference rooms, labs, hospitals, cleanrooms, greenhouses, food storage facilities, and more.

Additional Information:

• Item Code: RH550
• Delivery Time: 6-8 Weeks
• Packaging Details: Complete with built-in stand, wall mount bracket, optional (detachable probe (RH550-P), probe cable (RH550-C)), USB cable, Universal adaptor with multi-plugs (US, EU, UK, AU), and internal rechargeable Lithium Polymer battery

Product Details:

The EC510 is a conductivity testing kit. Kit includes EC500 meter, 3 calibration standards, 3 pH buffer pouches plus rinse solution, 3 cups, batteries and carrying case. Measures 5 parameters including conductivity, TDS, salinity, pH and temperature using one electrode. Analog bargraph indicates trends. Memory stores up to 25 labeled readings. Adjustable Conductivity to TDS ratio from 0.4 to 1.0; 0.5 fixed Salinity ratio.

Additional Information:

• Item Code: EC510
• Delivery Time: 6-8 Weeks
• Packaging Details: Kit includes EC500 meter, 3 calibration standards, 3 pH buffer pouches plus rinse solution, 3 cups, batteries and carrying case

Product Details:

The HT200 is a Heat Stress WGBT Meter which enables accurate measurements for Wet Bulb Globe Temperature (WGBT), Black Globe Temperature (TG), Humidity (%RH), Air Temperature (TA), Wet Bulb (WT) and Dew Point (DEW). Heat Stress Index measures how hot it feels when humidity is combined with temperature, air movement and radiant heat. Stores up to 50 readings. Comes with 9V battery and carrying case.

Additional Information:

• Item Code: HT200
• Delivery Time: 6-8 Weeks
• Packaging Details: Comes with 9V battery and carrying case

Product Details:

This Dual Laser Infrared Thermometer identifies the IR temperature where the dual laser converges into a single spot at approximately 50 inches from the target. Meter features fast 100 millisecond response times, Type K input, and a USB interface. Adjustable emissivity increases measurement accuracy for a variety of surfaces. Adjustable high/low set points with audible alarm alerts you when the temperature exceeds programmed set points. Featuring MAX/MIN/AVG/DIF measurements that displays the highest, lowest, average, and MAX minus MIN values. Comes complete with Type K temperature probe, USB cable and software, carrying case and 9-volt battery.

Additional Information:

• Item Code: 42570
• Delivery Time: 6-8 Weeks
• Packaging Details: Comes complete with Type K temperature probe, USB cable and software, carrying case and 9-volt battery.

Product Details:

The HW30 is a multifunction stopwatch with a digital up/down timer, temperature, humidity and heat index functions. The heat index measurement shows how hot it feels when humidity is combined with the actual temperature. Ideal for use in hot weather conditions. Additional features include a 12/24-hour clock, stopwatch, 30 lap/split memory and programmable alarm. HW30 Humidity/Temperature HeatWatch comes with lanyard, battery, and operating instructions.

Additional Information:

• Item Code: H30
• Delivery Time: 6 weeks
• Packaging Details: HW30 Humidity/Temperature HeatWatch comes with lanyard, battery, and operating instructions.

Product Details:

Extech’s DT100M measures distance up to 330ft (100m). It can calculate area and volume and the integrated Pythagorean Theorem allows the user to take indirect measurements. Other features include continuous measurement with Min/Max distance tracking, 20 point memory, addition/subtraction of sequential readings, front or rear edge reference, and a Stakeout function. Large quad backlit LCD display and double molded housing. It also has a handy built-in bubble level and comes with a wrist strap and batteries.

Additional Information:

• Delivery Time: 6-8 Weeks
• Packaging Details: Comes with Unit, a wrist strap and batteries.

Product Details:

Extech’s Type 2 Integrating Sound Level Meter with Octave and 1/3 Octave Band Real Time is displayed on a large 3.5" 320x240 TFT color backlit LCD.

• WIDE MEASUREMENT IN 5 RANGES

  20 to 90dB, 20 to 100dB, 20 to 110dB, and 30 to 120dB, 40 to 130dB

• MULTI-FUNCTION DISPLAY

  3.5" (320x240) TFT color LCD with backlight feature displays Leq, LE, Lmax, Lmin, Lp, L05, L10, L50, L90, L95

• CUSTOMIZABLE TO YOUR NEEDS

  Optional microphone extension cable for measurements in enclosures and other remote locations (407764-EXT)

Additional Information:

• Item Code: 407790A
• Delivery Time: 6-8 weeks
• Packaging Details: Complete with Windows® compatible software, USB cable, 4 x C batteries, microphone wind screen, mini screwdriver, 120V AC adaptor, and case

Product Details:

In mPRO-200 the protection feature is based on mathematical model of motor thermal image. The motor thermal overload protection function calculates the heat accumulated in the rotor and stator based on the effective heating current , integrated over a time. The relay appropriately takes in to account cooling of the winding by gradually emptying the accumulated current bucket. The relay displays the status of thermal condition of motor windings as a % of maximum permissible Thermal capacity. If inverse overload characteristic (lN\/) is selected then only the effect of thermal memory phenomenon is enabled. If current in any of the three phases exceeds over-current setting l> as well as accumulated thermal capacity (Thermal MEM) is >=100% then mPRO will trip the motor. If thermal memory is accumulated then Relay Contact Reset depends on Relay Reset selection (AUTO/MANUAL) and Thermal Reset

Product Details:

The overcurrent unit and the earth-fault unit continuously measure the phase currents and the neutral current of the object. On detection of a fault, the relay will start, trip the circuit breaker, provide alarms, record fault data, etc., in accordance with the application and the configured relay functions

Product Details:

 EC2 has been designed for the control of emergency and standby power systems. It integrates the functions of engine start/stop relay, engine and alternator supervision and annunciator. The relay has a user friendly MMI in the form of a keypad and a LCD display.The engine start/stop relay element allows the automatic starting of relay when power fails, automatic stopping of the engine when mains return and also the control and interlocking of mains and DG Circuit Breakers. It also includes delayed supervision of oil pressure switch